Every Window Service We Offer in Fontana, CA
One team for every window job in Fontana — from title 24 compliance & energy documentation to commercial storefront & glass repair.
Fontana Window Replacement handles residential and commercial window projects across Fontana and the central Inland Empire. From title 24 compliance & energy documentation to commercial storefront & glass repair, every service below is handled by our own team and backed by our workmanship guarantee.
Start on the Fontana Window Replacement homepage, read what people in Fontana say on our about page, or call (844) 511-2320 and describe what you need in your own words.
Our Window Services in Fontana, CA

Title 24 Compliance & Energy Documentation
Every replacement opening in this city answers to one document before it answers to a salesperson. Fontana sits in California Building Climate Zone 10, and the prescriptive fenestration package for that zone is a maximum U-factor of 0.30 and a maximum solar heat gain coefficient of 0.23.

Energy-Efficient & Low-E Glass Packages
In Climate Zone 10 the two prescriptive numbers are not equally hard. A 0.30 U-factor is routine for any decent dual-pane unit.

Vinyl Windows
Vinyl is the frame that makes the Zone 10 numbers cheapest to reach. A multi-chamber welded vinyl frame with a decent coating clears a 0.30 U-factor without effort and leaves the whole compliance argument resting on the glass, which is where it belongs.

Fiberglass & Composite Windows
Pultruded fiberglass earns its price here for a reason that rarely gets said out loud. It buys label headroom.

Wood & Clad-Wood Windows
The trap with clad wood is not the product. It is the paperwork.

Aluminum Windows
This is the page where the code and the sales pitch disagree. Non-thermally-broken aluminum cannot meet the Zone 10 prescriptive U-factor on a house.

Double-Hung & Single-Hung Windows
Hung windows carry a geometry problem that only becomes obvious in a bedroom. The sash slides inside the frame, so the clear opening you actually get is roughly half the frame, and the emergency escape opening the code wants is measured on the clear opening, not the unit size.

Casement & Awning Windows
Read the air leakage line on a fenestration label sometime. Casements almost always beat hung and sliding units, and the reason is mechanical rather than magical.

Sliding & Gliding Windows
Horizontal sliders are the default frame here, and the ones in your walls are almost certainly the problem. The original single-pane aluminum sliders in Fontana's postwar tracts have no thermal break, a worn wiper seal, and a rating that would fail anything written in forty years.

Bay & Bow Windows
A bay or bow is the one project on this site that reliably changes your compliance category. You are not replacing glass area, you are adding it, and the moment a project adds fenestration the prescriptive ceilings on total and west-facing glass stop being theoretical.

Picture & Architectural Windows
Fixed glazing carries the best numbers in any catalog and the worst answer to one question. No sash, no operator, no weatherstrip to wear out, so the U-factor is lower and the air leakage close to nothing.

Egress Windows & Bedroom Openings
Two codes want opposite things from a bedroom window, and this page is about making them agree. The life safety side wants the opening as large as possible.

Impact-Rated & Security Glazing
We will lead with the part other companies skip. Nothing in the code governing Fontana requires impact-rated glazing on a house.

Window Film & Home Tinting
Film is for the glass you are keeping. That is the whole positioning of this page, and it comes straight from how compliance works.

Patio & Sliding Glass Doors
Here is the rule that catches almost every homeowner comparing bids. A door with twenty-five percent or more glazing area is treated as a fenestration product, not as a door.

French & Swinging Patio Doors
The twenty-five percent glazing rule cuts both ways, and French doors are where it gets interesting. A door at or above it is held to the window line.

Entry Doors & Sidelites
The prescriptive package holds an exterior door to a maximum U-factor of 0.20, in every California climate zone, with no variation by region. That is tighter than the 0.30 the same package asks of your windows, and it is the number most entry door quotes never mention.

Window Screens & Solar Screens
Solar screens are the most misunderstood product we sell, so start with what they are not. They do not change the rating on your window.

Glass Repair & Insulated Glass Units
This is the cheapest page on the site and the likeliest to save you money, because of one distinction in the energy code. Replacing only the glazing or sash while the frame stays put is a repair.

Commercial Storefront & Glass Repair
Commercial glazing answers to a different part of the energy code than anything else on this site. Nonresidential envelope requirements sit in their own prescriptive section with their own tables, and the residential numbers this site talks about elsewhere simply do not apply to a tenant improvement.
What each of our services covers in Fontana
Open any service to see exactly what is included before you call.
Title 24 Compliance & Energy Documentation
Every replacement opening in this city answers to one document before it answers to a salesperson. Fontana sits in California Building Climate Zone 10, and the prescriptive fenestration package for that zone is a maximum U-factor of 0.30 and a maximum solar heat gain coefficient of 0.23. Those two numbers come from Table 150.1-A of the Building Energy Efficiency Standards, and the climate zone comes from the Energy Commission's own ZIP code assignment.
- title 24 compliant windows
- title 24 windows Fontana
- CF1R certificate of compliance
- CF2R certificate of installation
- climate zone 10 window requirements
- Climate Zone 10 prescriptive fenestration limits of a 0.30 maximum U-factor and a 0.23 maximum solar heat gain coefficient
- NFRC temporary labels left on the glass until the building inspector has verified them
- U-factor and SHGC values taken from an NFRC label or from the code's own default tables, never from a brochure
- Prescriptive compliance path documented per opening, with the tested unit named before anything is ordered
- Performance modeling path for houses where the prescriptive numbers cannot be met with the glass the owner wants
- Area-weighted average calculations where a mixed set of openings has to average out to the required numbers
Energy-Efficient & Low-E Glass Packages
In Climate Zone 10 the two prescriptive numbers are not equally hard. A 0.30 U-factor is routine for any decent dual-pane unit. The 0.23 solar heat gain coefficient is the one that actually decides which glass goes in your wall, and it is the one cheap bids miss.
- energy efficient windows
- low-E windows Fontana
- double pane windows
- ENERGY STAR windows
- argon filled windows
- solar heat gain coefficient
- Spectrally selective soft-coat low-E, double-silver and triple-silver stacks that hold visible light while cutting solar gain
- Argon fill at a half-inch airspace, specified against the actual cavity depth rather than assumed
- Warm-edge spacers in stainless steel, foam or thermoplastic instead of the conductive aluminum box spacer
- Whole-unit ratings read line by line: U-factor, solar heat gain coefficient, visible transmittance and air leakage
- Glass packages chosen by elevation, because west and south openings drive the August load and north openings barely move it
- An honest recommendation against triple glazing in this climate zone, where the third lite buys the easy number
- Staged whole-house projects that do the west and south elevations first when the budget covers half the openings
- Dark-frame and dark-laminate cautions on west exposures, checked against the manufacturer's own warranty limits
- Perimeter sealing with low-expansion foam and a movement-rated exterior sealant, because a leaky install undoes the label
Vinyl Windows
Vinyl is the frame that makes the Zone 10 numbers cheapest to reach. A multi-chamber welded vinyl frame with a decent coating clears a 0.30 U-factor without effort and leaves the whole compliance argument resting on the glass, which is where it belongs. That is why roughly three out of four houses we quote in this city end up in vinyl, and we are not apologetic about it.
- vinyl windows cost
- vinyl replacement windows Fontana
- welded vinyl windows
- white vinyl windows
- vinyl window frames
- Fusion-welded corners on sash and frame rather than mechanically fastened joints that open over time
- Multi-chamber extrusions with genuine internal webs rather than a hollow profile with a thick brochure
- Steel or aluminum interlock reinforcement on any sliding unit past about five feet of width
- Extrusion wall thickness confirmed in writing before the order, along with whether reinforcement is standard or optional
- Dark exterior laminates evaluated against the manufacturer's size and orientation limits for this heat load
- Foam-filled vinyl frames where the whole-unit U-factor has to come down without moving to another material
- Fire safety overlay compliance for foothill addresses, including welded corners and certified lineals
- Honest guidance away from vinyl on mid-century elevations where a wide profile ruins the sightline
- Whole-house packages of ten to eighteen openings, usually one to two install days once the units arrive
Fiberglass & Composite Windows
Pultruded fiberglass earns its price here for a reason that rarely gets said out loud. It buys label headroom. When the frame contributes less to the whole-unit U-factor, the glass no longer has to carry all the work, and that changes which coating you can afford to specify.
- fiberglass windows
- windows fiberglass
- pultruded fiberglass windows
- composite windows Fontana
- fiberglass window frames
- Pultruded fiberglass lineals with a thermal expansion rate close to that of the glazing they hold
- Insulated and foam-filled fiberglass frames for the lowest whole-unit U-factor in the residential lineup
- Frame headroom that lets a lighter, higher visible-transmittance coating still land under the required SHGC
- Narrow sightlines on large fixed and architectural units where vinyl profiles would read heavy
- Long horizontal sliders that stay square rather than sagging into a whistling interlock
- Wood-flour composite and engineered-interior options with a paintable or stainable inside face
- Documented assemblies for foothill and mountain addresses where the fire provisions apply
- Mixed-material specifications across one house, fiberglass where it earns its price and vinyl where it does not
Wood & Clad-Wood Windows
The trap with clad wood is not the product. It is the paperwork. A manufacturer's line carries several different tested ratings depending on size and configuration, and the number that lands on the certificate has to be the one for the unit you actually ordered.
- clad wood windows
- wood windows Fontana
- aluminum clad wood windows
- wood replacement windows
- fiberglass clad wood windows
- Extruded aluminum and fiberglass cladding over a solid wood interior, finished to match existing casework
- Tested ratings pulled for the exact custom size ordered, not the product line's headline number
- Simulated divided lites with spacer bars, priced against true divided lites and their rating penalty
- Sloped sill pans with end dams under every clad unit, so water never reaches the wood behind the metal
- Historic and matching work on the older stock around the original townsite and on foothill custom homes
- Honest guidance away from bare wood exteriors on south and west elevations in this ultraviolet load
- Stain and paint-grade interior species selected with the trim carpenter rather than from a catalog page
Aluminum Windows
This is the page where the code and the sales pitch disagree. Non-thermally-broken aluminum cannot meet the Zone 10 prescriptive U-factor on a house. Not with a better coating, not with argon, not with a thicker glass unit.
- aluminum windows
- aluminum window replacement Fontana
- thermally broken aluminum windows
- aluminum window frames
- mid century aluminum windows
- Thermally broken aluminum with a polyurethane pour or polyamide strut isolating the two halves of the extrusion
- Whole-unit tested ratings rather than the flattering center-of-glass numbers a spec sheet may show
- Architectural aluminum for spans where nothing else holds the sightline at the required strength
- Mid-century elevations where the original slim profile is worth preserving and a wide frame would ruin it
- A documented recommendation against plain residential aluminum, which cannot make the prescriptive U-factor
- Reglazing of sound existing aluminum frames as the cheaper repair route that avoids an alteration
Double-Hung & Single-Hung Windows
Hung windows carry a geometry problem that only becomes obvious in a bedroom. The sash slides inside the frame, so the clear opening you actually get is roughly half the frame, and the emergency escape opening the code wants is measured on the clear opening, not the unit size.
The residential minimum is a net clear opening of at least 5.7 square feet, with a clear height of at least twenty-four inches, a clear width of at least twenty inches, and the bottom of that opening no more than forty-four inches above the floor.
- double-hung windows
- single hung windows Fontana
- double hung replacement windows
- tilt-in double hung windows
- double hung window cost
- Net clear opening measured before the style is chosen, because a hung sash yields roughly half the frame
- Constant-force coil balances that hold a heavy sash rather than block-and-tackle systems that tire
- Tilt-in sashes for cleaning from inside, which matters most on second-story and stairwell openings
- Interlocking meeting rails with a compressed weatherstrip rather than a simple overlap
- Zero projection for narrow side yards, walkways and the covered porches on the older stock
- Single-hung configurations where the fixed upper sash saves money and leaks marginally less air
- Historic proportions and grid patterns matched on street elevations near the original townsite
Casement & Awning Windows
Read the air leakage line on a fenestration label sometime. Casements almost always beat hung and sliding units, and the reason is mechanical rather than magical. A crank-operated sash pulls in against a continuous compression gasket, so the seal tightens as the window closes instead of relying on a wiper.
- casement windows
- awning windows Fontana
- crank out windows
- casement window replacement
- casement windows cost
- Compression-sealed sashes that pull tight against a continuous gasket rather than wiping past a seal
- The best air leakage numbers in the residential lineup, which is a documented line on the paperwork
- Nearly full net clear opening, so a bedroom often makes its escape numbers in the existing rough opening
- Multi-point locking hardware drawing the sash tight along the stile rather than at one central point
- Steel operator arms and hinges rated for the sash weight, including laminated and triple-glazed units
- Awning units above kitchen counters and in bathrooms where privacy and ventilation both matter
- Fixed picture units stacked over operating awnings for large glass area with a small operating sash
- Interior screens and projection clearances checked against side yards, hose bibs and downspouts
Sliding & Gliding Windows
Horizontal sliders are the default frame here, and the ones in your walls are almost certainly the problem. The original single-pane aluminum sliders in Fontana's postwar tracts have no thermal break, a worn wiper seal, and a rating that would fail anything written in forty years. Replacing them is the highest-value job we do, and it is also the one where the compliance arithmetic works in your favor.
- windows to replace sliding glass door
- sliding windows Fontana
- horizontal slider windows
- gliding windows
- replace sliding window
- Replacement of the original single-pane aluminum sliders that fill the postwar and 1970s tract stock
- Like-for-like swaps that add no fenestration area, so the total and west-facing ceilings never engage
- Conversion of a sliding patio door opening into windows, including header, framing and stucco patch
- Fenestration area reduction as a deliberate move on houses already tight against the prescriptive ceilings
- Reinforced interlocks on any unit past about five feet, with tandem rollers rather than single
- Removable and cleanable track inserts, because valley dust is the most common service call on sliders
- Sloped sill pans and a correct lap over the weather-resistive barrier at every new or resized opening
- Escape-opening review in bedrooms, where a casement sometimes makes the number that a slider cannot
- Tandem roller and track replacement on sound frames as a repair rather than a replacement
- Three-panel and end-vent configurations for wide openings where a two-panel unit would be unwieldy
Bay & Bow Windows
A bay or bow is the one project on this site that reliably changes your compliance category. You are not replacing glass area, you are adding it, and the moment a project adds fenestration the prescriptive ceilings on total and west-facing glass stop being theoretical. The prescriptive package caps total fenestration at twenty percent of conditioned floor area and west-facing fenestration at five percent.
- add a bay window
- bay windows Fontana
- bow window installation
- bay window replacement
- garden window installation
- Fenestration area calculated against the twenty percent total and five percent west-facing ceilings before design
- Cable-supported and knee-braced framing sized for a unit carrying its load out past the wall plane
- Head boards built and flashed like a small roof, with slope, a pan and counterflashing back into the wall
- Fixed center lites flanked by operating casements for glass area, ventilation and escape opening together
- Bow configurations of four to six equal lites where a gentler radius suits the elevation
- A documented recommendation against west-facing bays in this climate zone, and toward north and east walls
- Insulated and air-sealed seat and head cavities as standard rather than as a priced option
- Garden window variants for kitchens, with the same area arithmetic and a very different interior use
- Roof and head-board detailing tied back into the existing wall assembly rather than caulked to it
- Interior jamb extensions, seat boards and trim finished to match the existing casework
Picture & Architectural Windows
Fixed glazing carries the best numbers in any catalog and the worst answer to one question. No sash, no operator, no weatherstrip to wear out, so the U-factor is lower and the air leakage close to nothing. It can never serve as an emergency escape opening in any room.
- picture window
- picture windows Fontana
- fixed windows
- architectural windows
- arched windows
- Fixed units with no sash, operator or weatherstrip, giving the lowest U-factor and near-zero air leakage
- Radius tops, half-rounds, trapezoids, octagons and true ellipses, each a custom tested size
- Triple-silver spectrally selective coatings specified below the code floor on large west and south glass
- Thicker and laminated lites past the deflection limit, with the rating recalculated for the change
- Suction-lift setting and shimmed bearing on heavy units so the seal never carries the load
- Operable partners specified in the same room, because a fixed unit can never serve as an escape opening
- Gable and stairwell glazing templated on site before the order rather than measured off a plan
Egress Windows & Bedroom Openings
Two codes want opposite things from a bedroom window, and this page is about making them agree. The life safety side wants the opening as large as possible. The energy side caps how much glass the house can carry.
- egress window install
- egress windows Fontana
- bedroom egress window
- egress window cost
- emergency escape window
- Net clear opening of at least 5.7 square feet, with five square feet allowed at a grade floor opening
- Clear height of at least twenty-four inches and clear width of at least twenty inches, measured open
- Sill height no more than forty-four inches above the finished floor
- Garage conversions, den reclassifications and accessory dwelling units, which is what drives this work here
- Header cutting into a bearing wall with temporary shoring and correctly sized king and jack studs
- Operating-type changes that gain the required opening inside the existing hole without widening it
- Sill lowering as an alternative to widening where the height limit rather than the area is the problem
- Fenestration area recalculated when an opening grows, because added area brings the prescriptive ceilings live
- Sloped sill pans, weather-resistive barrier laps and stucco patching that does not read as a scar
- Window wells and ladders where a lowered sill puts the opening below the exterior grade
- Obstruction review, since the opening has to work from inside without keys, tools or special knowledge
Impact-Rated & Security Glazing
We will lead with the part other companies skip. Nothing in the code governing Fontana requires impact-rated glazing on a house. There is no hurricane provision here and no windborne debris region, and any quote implying otherwise is selling a Florida product with a California ZIP code.
- impact windows
- security windows Fontana
- laminated glass windows
- sound reducing windows
- forced entry resistant windows
- Polyvinyl butyral and ionoplast interlayers that hold a broken pane in the frame rather than out of it
- Laminated glazing specified for forced-entry resistance on accessible ground-floor openings and door sidelites
- Acoustic laminated packages with asymmetric glass thicknesses for freeway, rail and aircraft noise
- Ratings recalculated on the laminated assembly, since the interlayer moves the SHGC and visible transmittance
- Hardware, hinges and interlocks sized for the extra weight a laminated sash carries
- Ultraviolet blocking as a side benefit, which is what protects flooring and upholstery on sun-facing rooms
- A plain statement that no local code requires impact-rated glazing on a house in this jurisdiction
- Targeted specification by opening rather than a whole-house upgrade nobody needed
- Retrofit insert and full-frame options priced side by side, since a laminated unit is heavier in both
- Sidelite and transom laminating around entry doors, where the glass sits within reach of the thumbturn
- Security film as the lower-cost alternative on openings that are not being replaced this year
Window Film & Home Tinting
Film is for the glass you are keeping. That is the whole positioning of this page, and it comes straight from how compliance works. The paperwork reads the rating on the fenestration unit, and an aftermarket film applied later does not change the label that documentation was written against.
- home window tinting
- window film Fontana
- residential window tinting
- solar window film
- security window film
- Spectrally selective and reflective films that reject energy rather than absorbing it into the glass
- Manufacturer approval checked for dual-pane application, by glass thickness, size and orientation
- Insulated glass warranty terms reviewed before application, since many exclude aftermarket film
- Single-pane applications on pre-1980 aluminum glazing, which is the highest-return film work in the city
- Ultraviolet rejection to protect flooring, artwork and upholstery on south and west exposures
- Safety and security films that hold a broken pane together on openings not being replaced
- A clear statement that film is not a prescriptive compliance path on a replacement job
- Honest advice against buying film on top of a new low-E glass package
Patio & Sliding Glass Doors
Here is the rule that catches almost every homeowner comparing bids. A door with twenty-five percent or more glazing area is treated as a fenestration product, not as a door. Your patio slider goes onto the certificate alongside the windows and pulls the same area-weighted numbers.
- sliding glass patio doors
- patio door replacement Fontana
- sliding glass door installation
- multi slide patio doors
- patio door repair
- Glazed doors at or above twenty-five percent glazing treated as fenestration products on the paperwork
- Area-weighted averages that a large door can drag down if it is priced by a separate trade
- Tandem stainless roller assemblies, adjustable tracks and head channels stiff enough for eight and nine-foot panels
- Sloped sill pans with end dams and a positive lap over the weather-resistive barrier at the grade transition
- Two, three and four-panel configurations compared on usable opening rather than on nominal width
- Multi-slide and pocketing systems where the header and structure can carry them
- Laminated lites on ground-floor doors for security rather than for weather
- Doors and windows written onto one certificate, prepared by whoever is installing both
French & Swinging Patio Doors
The twenty-five percent glazing rule cuts both ways, and French doors are where it gets interesting. A door at or above it is held to the window line. A door below it is a door, and the package holds doors to a maximum U-factor of 0.20 in every climate zone.
- french doors patio
- french door installation Fontana
- double french doors
- french door replacement
- swinging patio doors
- The twenty-five percent glazing threshold that decides whether a door is measured as fenestration or as a door
- The 0.20 maximum door U-factor that applies in every California climate zone to units below the threshold
- Multi-point locking systems throwing into the head and sill on both leaves rather than surface bolts
- Astragals with a compression bulb and integrated sweep on the inactive leaf
- Outswing and inswing evaluated on floor plan, patio traffic and which face takes direct sun
- Adjustable thresholds with sloped pans beneath, because the sweep will need taking up after the first year
- Full-lite, three-quarter-lite and divided-lite configurations priced against the requirement each one triggers
Entry Doors & Sidelites
The prescriptive package holds an exterior door to a maximum U-factor of 0.20, in every California climate zone, with no variation by region. That is tighter than the 0.30 the same package asks of your windows, and it is the number most entry door quotes never mention. The reason the requirement can be that tight is construction.
- entry doors
- front door replacement Fontana
- fiberglass entry door
- entry door with sidelites
- steel entry doors
- The 0.20 maximum door U-factor in the prescriptive package, which is tighter than the window requirement
- Polyurethane-foam-cored fiberglass and steel slabs with an edge thermal break
- Sidelites, transoms and decorative lites evaluated against the requirement they push the assembly toward
- Composite stiles and rails at the threshold, which is where wood-edged doors used to fail
- Fiberglass specified over steel on full-sun south and west entries in this heat load
- Wood slabs recommended only under a genuine overhang, with the refinishing interval stated up front
- Three-inch strike screws into framing, reinforced strikes and a full one-inch deadbolt throw
- Laminated glazing where an entry lite sits within reach of the interior thumbturn
Window Screens & Solar Screens
Solar screens are the most misunderstood product we sell, so start with what they are not. They do not change the rating on your window. The paperwork reads the label on the unit, and a screen hung outside it does not alter that label or move you toward 0.23.
- replace window screens
- solar screens Fontana
- window screen repair
- sun screens for windows
- custom window screens
- Solar mesh at seventy to ninety percent shading factor, mounted outside where it intercepts energy first
- A clear statement that a screen does not change the rating on the window or the prescriptive arithmetic
- Exterior shading described on the installation certificate and creditable only on the performance path
- Split specifications, solar mesh on west and south elevations and standard mesh everywhere else
- Roll-formed aluminum frames with proper corner keys that stay square in the track
- Fiberglass and pet-resistant mesh for ground-floor openings on houses with animals
- Per-opening measurement rather than nominal sizing, because identical-looking tract houses are not identical
- Rescreening and frame repair as the cheaper answer where the glass itself is already sound
Glass Repair & Insulated Glass Units
This is the cheapest page on the site and the likeliest to save you money, because of one distinction in the energy code. Replacing only the glazing or sash while the frame stays put is a repair. Changing the frame is an alteration, and that pulls in the certificates.
- glass window replacement
- foggy window repair Fontana
- insulated glass unit replacement
- broken window glass repair
- window seal failure
- The repair and alteration boundary, where keeping the frame avoids the certificates entirely
- Failed insulated glass units diagnosed by the condensation that sits between the lites
- Sealed unit replacement measured on daylight opening, overall size, glass thickness and airspace
- Coating and spacer upgrades taken on the same visit, from clear or hard-coat to spectrally selective soft-coat
- Tempered glass identified by the etched corner stamp and replaced in kind
- Safety glazing in hazardous locations near doors, tub and shower enclosures, walking surfaces and low sills
- Honest assessment of when a frame has failed and reglazing is no longer the right answer
- Same-visit measurement and secured openings while a made-to-order lite is in production
Commercial Storefront & Glass Repair
Commercial glazing answers to a different part of the energy code than anything else on this site. Nonresidential envelope requirements sit in their own prescriptive section with their own tables, and the residential numbers this site talks about elsewhere simply do not apply to a tenant improvement. That is the first thing to establish on a commercial call, because the two conversations use the same vocabulary and mean different things.
- storefront glass repair
- commercial glass Fontana
- storefront window replacement
- commercial glass door repair
- tenant improvement glazing
- Nonresidential envelope requirements, which sit in their own section of the code with their own tables
- Stick-built aluminum storefront in the common two-inch by four-and-a-half-inch profile
- One-inch insulated units glazed into cut and sealed extrusions on site
- Thermally broken and non-broken systems matched to what is already in the opening
- Made-to-order tempered lites for the hazardous locations that storefront glazing almost always occupies
- Board-up, measure, order and set handled on one invoice for property managers
- Entrance door closers, thresholds and operating force coordinated rather than left to another trade
- Office-front glazing, interior partitions and vision panels inside distribution and light-industrial shells
What Fontana property owners ask us
Which window services does Fontana Window Replacement handle?
Everything listed on this page, residential and commercial, across Fontana and the central Inland Empire. Work is done by our own crews rather than handed to whoever is cheapest that week, which is the only way the workmanship warranty means anything.
Can I combine more than one service in a single job?
Yes, and it is usually cheaper. Bundling window work into one mobilization saves setup, disposal and travel, and it means one crew, one schedule and one written free estimate instead of three contractors blaming each other.
Do you give free estimates for every service?
Every one. We come out, measure, look at the real condition of the work area, and put an itemized free estimate in writing with materials and scope spelled out. No charge, no deposit, and no obligation to book.
What Fontana Customers Say
They were the only company out of three that put the U-factor and the SHGC on the quote for each window. Replaced eleven sliders, the back bedrooms are usable in the afternoon again, and the inspection took about ten minutes because the paperwork was already right.
Called them about replacing the whole house and they told me eight of my frames were fine and only needed the glass units swapped. Saved me a large chunk of money and they still came back and did the four that genuinely needed replacing.
We converted the garage into a bedroom and the escape window was the part nobody else would explain. They measured the clear opening, showed me why a casement made the number without cutting the wall wider, and it passed first time.
Old house near downtown, so the clad wood had to be custom sized. They pulled the ratings for the exact units before ordering rather than after, which the inspector clearly appreciated. Sill pans done properly and the stucco patch is invisible.
Service Areas
Fontana Window Replacement serves Fontana, CA and surrounding communities including: